The 5 Best Gas Geysers: Know What They Do and How to Use Them

As the winter season arrives, hot water becomes a necessity in every household. While there are various ways to heat water, gas geysers have become the most popular choice due to their efficiency and cost-effectiveness.

Gas geysers work by heating water using natural gas, propane or butane. They operate by igniting gas flames that heat the water passing through heat exchangers. Once the water reaches the required temperature, it flows out of the geyser’s outlet.

Here are the 5 best gas geysers in the market:

  1. Rinnai RUC98iN Ultra Series Natural Gas Tankless Water Heater
    • The Rinnai RUC98iN is a tankless water heater that provides a continuous supply of hot water.
    • It boasts a maximum flow rate of 9.8 gallons per minute, making it perfect for large families.
    • The unit is also energy-efficient, with an Energy Factor of 0.95.
  2. Eccotemp i12-NG Tankless Water Heater
    • The Eccotemp i12-NG is a compact tankless water heater that is perfect for small apartments or cabins.
    • It runs on natural gas and has a flow rate of 3 gallons per minute.
    • The unit is also easy to install and can be mounted on a wall.
  3. Rheem RTGH-84XLN Outdoor Natural Gas Tankless Water Heater
    • The Rheem RTGH-84XLN is a high-end tankless water heater ideal for large homes and commercial buildings.
    • It has a flow rate of 8.4 gallons per minute and uses natural gas.
    • The unit is also Wi-Fi enabled, allowing you to control the temperature from your smartphone.
  4. Takagi T-KJr2-IN-NG Indoor Tankless Water Heater
    • The Takagi T-KJr2-IN-NG is a compact tankless water heater suitable for small households.
    • It operates on natural gas and has a flow rate of 6.6 gallons per minute.
    • The unit is also energy-efficient, with an Energy Factor of 0.82.
  5. Bosch Greentherm C 1050 ES NG Tankless Water Heater
    • The Bosch Greentherm C 1050 ES NG is a top-of-the-line tankless water heater ideal for large homes and buildings.
    • It has a flow rate of 10.5 gallons per minute and uses natural gas.
    • It also features a condensing design that recovers waste heat to increase energy efficiency.

How to Use Gas Geysers

Using gas geysers is simple and requires the following steps:

  1. Ensure the gas supply is turned on, and the geyser is properly installed.
  2. Open the hot water faucet to allow water to flow into the geyser.
  3. Turn on the geyser by igniting the pilot light or pressing the start button.
  4. The geyser will automatically regulate the water temperature and supply hot water when required.
  5. When done, turn off the geyser and close the hot water faucet.

Gas geysers are an excellent investment for any household, providing endless hot water at a lower cost. By understanding how they work and proper usage, you can select the perfect geyser for your home and enjoy a cozy winter season.

By A Akshita 6 Min Read
Last updated: August 24, 2022

Leave a Reply Cancel reply